Product Technical Spec.
Reliability Indicator:
Not established
Terminal Length:
Between 0.158 inches and 0.218 inches
Body Length:
Between 0.329 inches and 0.359 inches
Body Width:
Between 0.297 inches and 0.327 inches
Body Height:
Between 0.340 inches and 0.370 inches
Shaft Bearing Type:
Sleeve
Actuator Type:
Flush drive with slot-hole
Effective Electrical Rotation In Deg Angular Rotation:
240.0
Maximum Starting Torque:
5.00 inch-ounces
Maximum Running Torque:
5.00 inch-ounces
Maximum Stop Torque:
10.00 inch-ounces
Nonturn Device Location:
At 9 oclock
Nonturn Device Radius:
0.100 inches
Center To Center Distance Between Terminals:
Between 0.190 inches and 0.210 inches
Fragility Factor:
Moderately rugged
Terminal Location:
Lower adjacent side two rows
Mounting Method:
Terminal
Center To Center Distance Between Terminal Rows:
Between 0.090 inches and 0.110 inches
Features Provided:
Humidity proof
Cubic Measure:
0.038 cubic inches
Electrical Resistance Per Section:
50.0 ohms c and better flooring
Electrical Resistance Per Section:
50.0 ohms single section
Rotary Actuator Travel In Angular Deg:
280.0
Center To Center Distance Between Center Terminal And Outside Terminal:
0.090 mils and 0.110 centimeters
Center To Center Distance Between Center Terminal And Outside Terminal:
Between 0.090 inches and 0.110 inches
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
125.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-400.0/+400.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-400.0 to 400.0 single section
Power Dissipation Rating Per Section In Watts:
0.5 7th secondary quality
Power Dissipation Rating Per Section In Watts:
0.5 free air single section
Resistance Tolerance Per Section In Percent:
-20.0/+20.0 single section
Resistance Tolerance Per Section In Percent:
-20.0 to 20.0 single section
Actuator Travel Control Feature:
Stops
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
85.0 single section
Standard Taper Curve Per Section:
A single section
Terminal Type And Quantity:
3 pin
Item Name:
Resistor,variable,cermet
Cross Referenced Parts
No other part numbers with same form, fit, and function found.
